Sizes: 50-56 and 62-68The data for the larger listed in brackets if only one number is given, it applies to both sizes.
You will need: 200 (300) g of white yarn "Sable Sport» (51% merino wool, 49% polyacrylic, 190 m/50 g) or 200 (300) g of white yarn «Phildar Luxe» (70% polyacrylic, 30% wool , 205 m/50 g); straight needles, number 2 and 2.5, short circular needle number 2, a set of 5-spoke hosiery № 2,5; hook № 2, 2 buttons, 2 pieces satin ribbon length of 50 cm for the shoes.
The front surface of: persons. ranks - people. loop sts. series - WS. loop.
Wrong expanse: persons. series - WS. loop sts. ranks - people. loop.
Gum spokes number 2: knit alternately 1 individuals., 1 sts.
Openwork band 1, the spokes № 2,5: knit the scheme on it are individuals. and WS. ranks. Repeat loop repeat. 1 x run from the 1st to the 20th p., Then repeat with the 21 th to the 28 th p.
Openwork band 2, spokes № 2,5: knit the scheme on it are individuals. and WS. ranks. Locate the middle leg cut from the 1st to 6th p. Both sides repeat from 7 th to the 10 th paragraph rapport. Repeat from 1 st to 8 th p. Density knitting 28 sts and 43 p. = 10 x 10 cm
Jacket with the smell on the backBefore: dial the spokes 58 (70) sts and knit between edging openwork pattern, distributing it over the middle. In 20 (26) cm from the edge of the dial pad to close the neckline middle 8 (12) sts and finish both sides separately. Rounding cut close to the inner edge of each 2-m p. 1 x 3, 1 x 2 and 4 x 1 st remaining 16 (20) sts to close the shoulder in 24 (30) cm from the edge of the dial pad. The right side of the back: dial the spokes 39 (45) sts and knit between edging openwork pattern 1, starting a pattern for both front. At 22 (28) cm from the edge of the dial pad to close the neckline on the left side every 2nd p. 1 x 16 and 1 x7 (9) § The remaining 16 (20) sts to close the shoulder in 24 (30) cm from the edge of the dial pad.
The left side of the back: Knit symmetrically.
Sleeve: dial the spokes to 36 (40) sts and bind 1.5 cm rubber band in the back row to add 6 sts evenly = 42 (46) sts then knit openwork stripes one, spreading from the middle of the pattern. Simultaneously to add bevels on both sides, from the gum, 3 (4) x 1 st in each 8-m p. and 3 (6) x 1 st in each of the 6-m p., including adds loop pattern. In 13 (19) cm from the gum to close all the loops. Assembly: do shoulder seams sewn sleeve, aligning the center sleeve with shoulder seam. Run side seams and bottom seams sleeves. The vertical edges of the backrest tie hook 1 p. Art. b / n. On neckline on circular needle type 89 (97) sts and knit 1 p. facial loops and 1.5 cm rubber band, and then close all the loops on the image. Attached to the back portion button.
The front of the right leg cut: dial the spokes 40 (45) sts and bind 1.5 cm rubber band. Continue to work between two strips of lacy edging, spreading from the middle of the pattern. Added to both sides of the side bevel 4 x 1 st in every 4th p. and 1 x 1 st in next 6-m p. (5 x 1 st vkazhdom 10-mr.). Cherez6, 5 (13) cm from the gum close to the inner edge of the bevel step seam 1 x 3 and 1 x 1 point to temporarily suspend all sts. The front part of the left trouser leg: Knit symmetrically. Then translate these parts pending hinge on needles and knit the entire 11.5 (14) cm straight. Then knit all 3 cm elastic loops for the belt, and then close all the loops. The back of the pants, first knit similarly. Run on all hinges 11.5 (14) cm and then temporarily put both sides in every 2 p. 4 x 8 (9) of section then run on all 3 cm elastic loops and close the loops. Assembly: do seams.
Dial the needle 44 sts and knit the first 20 p. openwork stripes 1, execute! lacy number (* 2 persons., 2 sts knit together the front, 1 yo, repeat from *). Then, lifting the average knit 12 sts delicate strips 2, temporarily putting aside the other loops. Repeat the last 4 in a pattern and link 16 p. in height. Then type on both sides of this part of the climbing 12 points to join them on the pending 16 sts = 68 sts and knit 8 circular p. openwork stripes 2. 12 points mark the front and rear toe for 12 points for the heel.
Continue to work around the front stitch - knit all sts front. In each circle, the first of a number of provyazyvayut marked loops together with the previous and the latest tagged loops together with the next loop on the front = 4 subtraction in each circular row. When the needles remain on 2 sts of the number of marked, make a loop of the plantar knit stitch. Run back seam and threaded through the holes several openwork satin ribbon.